A DIY bathroom vanity can take the form of a flea market cabinet turned into a stylish bathroom vanity with antique charm. The first step in this DIY exercise is to remove the top of the cabinet by unscrewing the cabinet top and removing it from the frame.
The creation of the DIY bathroom vanity continues with the reinforcement of the frame with the use of an electric screwdriver. After a long screw is placed in the center of the frame, the cabinet top is measured. A sub-top made from plywood is cut and used as a replacement for the original top.
The cabinet back is removed using a hammer and a screwdriver. A piece of 2" x 4" board is cut to the height of the inside of the cabinet. The board is then placed parallel to the original supporting beam. To allow room for the drawers and sink of the DIY bathroom vanity, the new support beam is glued and screwed in the center front of the cabinet.
Finding the right small bathroom vanities that suit the style of a homeowner, overcomes the storage, decorating and design challenges presented by a small bathroom. They pave the way for the creation of a perfectly stylish small bathroom.
Classic and common among small bathroom vanities is the cabinet-style vanity. While their solid shape takes up most of the space, its built-in drawers and concealed compartments provide a generous serving of storage all in one place.
Small bathroom vanities, in the form of wall-mounted vanities, are attached only to the wall. They reveal an open space beneath that extends from the sink down to the floor. This floating design lends an airy ambiance to the room, very similar to what a pedestal or console sink provides. Depending on its specific design, wall mounted vanities may or may not provide added storage. A wall-mounted vanity consisting only of a countertop and sink provides no storage at all while a vanity featuring a short cabinet beneath provides a small amount of additional storage space.
The creation of the DIY bathroom vanity continues with the reinforcement of the frame with the use of an electric screwdriver. After a long screw is placed in the center of the frame, the cabinet top is measured. A sub-top made from plywood is cut and used as a replacement for the original top.
The cabinet back is removed using a hammer and a screwdriver. A piece of 2" x 4" board is cut to the height of the inside of the cabinet. The board is then placed parallel to the original supporting beam. To allow room for the drawers and sink of the DIY bathroom vanity, the new support beam is glued and screwed in the center front of the cabinet.
Finding the right small bathroom vanities that suit the style of a homeowner, overcomes the storage, decorating and design challenges presented by a small bathroom. They pave the way for the creation of a perfectly stylish small bathroom.
Classic and common among small bathroom vanities is the cabinet-style vanity. While their solid shape takes up most of the space, its built-in drawers and concealed compartments provide a generous serving of storage all in one place.
Small bathroom vanities, in the form of wall-mounted vanities, are attached only to the wall. They reveal an open space beneath that extends from the sink down to the floor. This floating design lends an airy ambiance to the room, very similar to what a pedestal or console sink provides. Depending on its specific design, wall mounted vanities may or may not provide added storage. A wall-mounted vanity consisting only of a countertop and sink provides no storage at all while a vanity featuring a short cabinet beneath provides a small amount of additional storage space.
About the Author:
Looking to find the best deal on DIY bathroom vanity, then visit www. bathroomideaphotos.com to find the best advice on bathroomideaphotos for you.
Aucun commentaire:
Enregistrer un commentaire