Pages

dimanche 27 mai 2018

For Wood Deck Staining New Jersey Is Worth Visiting

By Martha Hayes


Decks are mostly made of wood. The high level of beauty and the fact that wood is natural are the reasons wood is preferred over other materials. However, regular maintenance is compulsory is order for the wood to preserve its color and grain. This can be achieved in several ways including covering the deck not in use. The second option is to have it stained. When in need of Wood Deck Staining New Jersey should be visited.

Normally, these structures are exposed daily to the hot sun. After a given duration, the wood that is not sealed begins to get damaged due to radiations from the sun. Discoloration and warping are the two major effects that radiation from the sun causes on timber. Despite the fact that warping and discoloration are natural effects that occur to wood, exposure to sunlight accelerates the process.

Parts of the wood that are warped become more susceptible to cracking and even more warping. To avoid all these, a high-quality stain should be applied over the timber to preserve it. The work of the stain is to prevent sunlight from penetrating the timber completely. This helps to protect underlying layers of the timber from damage. Thus, this prevents warping.

The second major function of the stain is prevention of rain water or water from other sources from soaking into the timber. As decks are exposed to both rain and cold, if one fails to protect the timber then a lot of water would soak in it. Availability of water creates conducive environment for growth of mold and mildew. Timber that has absorbed water expands and becomes tender after which it rots. A barrier is created between water and timber by the stains.

When staining a deck, preparation is a key determinant of the final results that one can achieve. The first thing one should do is to clean the timber well before applying stain. The surface needs to be completely smooth at the time stain is applied. If the surface is dirty, then the stain is prevented from penetrating into the timber, which results in poor work being done.

Newly installed surfaces with only a few days old need to be thoroughly cleaned to remove mill scale. On the contrary, if the surface is old and one is reapplying the stain, then dirt, mildew and old stains need to be removed prior to application. It is advised for one to perform the cleaning using a deck scrub. Scrub makes the removal of grime and dirt to be simpler and also kills mildew.

When the cleaning is finished, the next step is application process of the stain. There are various types of stains which makes reading of instructions on the label very important prior to commencing the work. The person applying the stain must draw their attention to the manufacturer recommended number of coats and applicable intervals between coats.

The stain can be applied by the use of brush or a paint roller. Paint brushes are recommended since they help with ensuring the stain penetrates deeper into the grains of the timber. Also, they create friction with the surface resulting into the timber absorbing more stain, hence better results. Before the deck can be used it must be allowed sufficient time to dry completely.




About the Author:



Aucun commentaire:

Enregistrer un commentaire

 
Blogger Templates